Liquid Filtration

Windsor Industrial Products
kff4
 

K Factor Filters


The K Factor Filter is a fully automatic and self-cleaning industrial liquid filtration system, engineered and designed to suit most applications in a number of industries where removal of solids from liquids is required.

A number of different construction types and sizes are available.

Each application has its own challenges and requirements. We work closely with each customer to insure that their specific needs are met. In each of these applications the filter offers a significant range of features and benefits.

How it works


The flow of liquid enters the K FACTOR FILTER into the header box and evenly distributes the flow across the media via the shearing nozzle.

This nozzle creates a shearing action that pushes the solids along to the bottom area of the filter and allows the clean liquid to go through the media.

The flow of liquid is contained within the two sealing wheels allowing the media to trap the solids and the clean to return to the process.

As the liquid level in the filter between the two sealing wheels rises it will be sensed by a level probe and initiate a cleaning cycle.

The clean filtered liquid return to the process.

Note: The shearing action of the filter is the key feature in media usage. The solids are not pressurized into the media which extends the life of the media and allows for greater solids removal.
 
kff2
 

Removes all solids


Regardless of
▪ Size
▪ Shape
▪ Specific gravity
▪ Concentration of dirt
▪ Type

K Factor Filter


The key feature of the K Factor Filter is the shearing action produced by the unique shearing nozzle. The liquid to be filtered flows into the header box and then is evenly distributed across the filter media via

"The Shearing Nozzle"

The filter media is on a steep slope to create the shear. The flow of liquid from the nozzle impacts on the media creating "The Shearing Action". The unwanted solids are pushed to the bottom of the sealed basin and the clean filtered liquid flows through the selected filter media. This unique feature reduces the footprint, reduces the amount of media used and improves the filtration.

The shearing nozzle is situated close to the filter media to create a shearing action on impact. The flow enters the header box and impacts on the media to push the solids to the bottom of the sealed basin to:
  • increase filtration
  • reduce the amount of filter media used
  • smaller footprint
  • smaller particle removal
 
3dkff
kff4
 

Accessories


Access ladders, explosion venting, level sensing and over temperature protection are provided as standard.

Outfeed is by a silo rotary screw, feeding through a rotary valve and bridge breaker into either a mechanical conveyor or meter­ing screw.

Truck dump unloading facilities are also available.
Features
  • Self–cleaning
  • Fully automatic
  • Continuous operation
  • Bubble tight seal
  • No backwash
  • Simple design
  • Media
  • Flow from 5gpm & up
  • Unique design
  • Auto level probe
  • Advances as required
  • Proven product
  • Internal by-pass
  • Barrier filter design
  • Baffles
  • Flow velocity increaser
 
Benefits
  • No maintenance
  • Cost saving
  • No downtime
  • No by-pass of solids
  • No liquid loss
  • No attendant required
  • Removes trace oils
  • Meets all needs
  • Solids to 5 microns
  • Self-cleaning
  • Low cost to run
  • No risk
  • Protection
  • All the solids
  • Evens out flow
  • Flow velocity increaser. Increases the flow and the removal process

Construction


Standard unit is Carbon steel housing powder coated with aluminum seal wheels and stainless belting.

▪  Available in 304 stainless
▪  Available in 316 stainless
▪  Available in aluminum
▪  Available in plastic
 
kff6
Applications
  • Agricultural
  • Automotive Pre Treatment, Automotive Parts
  • Backwash, Central Cooling Systems
  • Chemical Filtration, Chemical Save
  • Cooling Towers
  • Custom Applications
  • Cyclone Purge
  • Deburring Applications
  • Degreasing Environment
  • Heat Exchanger
  • Machine coolant
  • Magnetic Filtration
  • Nozzle Protection
  • Onsite Testing
  • Plastic
  • Snow Melting
  • Stack Scrubbing
  • Sugar Refining
  • Turbine Parts
  • Washing, Waste Water, Water Intake
  • Wire Drawing
  • Zebra Mussels
Windsor Industrial Products

Need some engineering advice?

Get in touch with windsor
About windsor group

Windsor provides total engineering solutions from concept through to after sales support. With 45 years industry experience, dealing with Windsor you’ll always get a solution oriented approach to handling your project that’s guaranteed to perform.

More about windsor group
 
 
 
 
Contact us
Wellington - Head Office:
+64 4 232 8080 windsor.sales@windsor.co.nz
 
Auckland - IPSCO Division:
+64 9 262 4474 ipsco.sales@windsor.co.nz
Christchurch - CFS Division:
+64 3 366 1411 sales@cfsfilter.co.nz
 
Windsor Engineering Australia:
+61 3 9541 8600 aust.sales@windsorgroup.com.au