Panel & Pleated Panel Filters

IPSCO Filtration Products & Services
Panel Filters
 

Panel & Pleated Panel Filters


We offer a wide range of panel filters in flat and pleated configurations in a number of sizes.

AL Series Panel Filter - G2 - G4


Aluminium framed panel filter. Two frame thicknesses are available - 11mm and 22mm.

Low Cost - High Efficiency;
 
The IPSCO AL Series Panel Filter is assembled to customer supplied measurements.  AL filters are manufactured from a lightweight extruded aluminium filter frame and push-fit acrylic corner joints.
 
The Viledon media fitted to AL filters offers a long and efficient service life, ideal for systems initially supplied with low cost filters that don’t last very long.

What is so great about the AL series?
▪  Low Cost - High Efficiency
▪  Long and efficient service life
▪  Easy means of upgrading the original filters
▪  Two thicknesses to choose from
▪  The media is secured into the frame with a rubber bead which is easily taken out when the filter media needs washing or replacing.
▪  Corrosion resistant aluminium and plastic parts
 
Panel Filters
Panel Filters
 

EM Panel Filters - G2 - G4

Stainless steel framed filters for extra strength and long life. The EM has a quick release gate and is designed to be fixed direct to housings and intakes without the need for an outer holding frame.  The EMD frame outers are riveted into place and the filter is designed to fit into our standard CHF holding frames. 

The two Quick release boomerang clips on the EM make the media incredibly easy to change ( not available on the EMD ).  EM and EMD panel filters offer extended service life to a wide variety of ventilation applications which means reduced operating costs.

FEATURES
▪  Type 304 stainless steel frame components
▪  Long and efficient service life
▪  Upgrade filter simply by changing media
▪  Filter media is fully supported by a strong St St grid both sides

AL50R Pleated Panel Filters - G2-G4

Manufactured from high quality aluminium framing with media pleated to achieve a higher surface area resulting in longer service life compared to a flat panel. Featuring stainless steel wire supports which are removable, the media can be changed at the end of its life for a fresh mat.

FEATURES
▪  Longer service life compared to flat panel
▪  Media mats are easy to change
▪  Economical to freshen - just replace media only
▪  Corrosion resistant aluminium and plastic parts
 
 
Pleated Panel Filters
Pleated Panel Filters
 

PPF50 Pleated Plastic Filters

Manufactured from plastic framing with media pleated to achieve a true 2:1 higher surface area resulting in longer service life compared to a flat panel.  Featuring stainless steel mesh supported media on both the clean air and dirty air side.

What is so great about the PPF50?
▪  Longer service life compared to flat panel
▪  Plastic frame allows easy slide into channel frames
▪  Filters seal well against each other, lessening bypass
▪  Economical to freshen - just replace media-pack only
▪  The media is secured into the frame with a plastic bead which is easily taken out when the filter media needs washing or replacing.
▪  Corrosion resistant aluminium and plastic parts

Disposable Cardboard Framed Filters


Our disposable pleated filters are a minimum of 40% average efficiency and are rated MERV 8. This is achieved with 100% synthetic charged gradient density media, optimum pleat spacing and high quality construction.
 
Our pleated filters have exceptionally high initial and sustained efficiency, high dust holding capacity, and very low pressure drop.
 
The media is resistant to a wide range of chemicals, does not absorb moisture and will not support microbial growth.
 
Cardboard Filters
Overspray Collection Filters
 

Paint / Overspray Collection


Standard Filtr’Overspray is well adapted to filtration of paint overspray in spray booths.

It is easy to manipulate and to stock. Its lifetime, 6 times longer than other filtering medias on the market, allows to make important costs reductions.

This filter is perfectly adapted to filtration of any wet overspray particles (paints, varnishes, gel coat, glue, silicone, polyester etc…).

Learn more >
 

Holding Frames & Accessories


A full range of modular holding frames is available to take all filters.

Learn more >
 
Holding Frames & Accessories
Grease Filter
 

Grease Filters

The Honeycomb filter has become the Standard Grease filter by consensus displacing the cheaper mesh filters. This is because of its efficiency and its ability to be cleaned.
 
Mesh filters trap and accumulate solid and other combustible materials inside the filter which is difficult to remove. It can appear clean on the outside whilst harbouring dangerous amounts of combustible material.
 
Construction:
The Honeycomb filter has large smooth walled passages which can easily be cleaned using a water jet. Special work hardened aluminium formed into a flying “V” corrugated Honeycomb creates large smooth walled passages. Clogging which is so prevalent in other filter designs is virtually eliminated. Handles are provided.
IPSCO Filtration Products & Services

Need some engineering advice?

Get in touch with windsor
About windsor group

Windsor provides total engineering solutions from concept through to after sales support. With 45 years industry experience, dealing with Windsor you’ll always get a solution oriented approach to handling your project that’s guaranteed to perform.

More about windsor group
 
 
 
 
Contact us
Wellington - Head Office:
+64 4 232 8080 windsor.sales@windsor.co.nz
 
Auckland - IPSCO Division:
+64 9 262 4474 ipsco.sales@windsor.co.nz
Christchurch - CFS Division:
+64 3 366 1411 sales@cfsfilter.co.nz
 
Windsor Engineering Australia:
+61 3 9541 8600 aust.sales@windsorgroup.com.au