Odour Control

clouds
odourcontrol
 

Odour Control Equipment


Some locations may be affected by odours, ranging from nuisance to overwhelming. Purafil supports your efforts to readicate all types of odours and provide a pleasant environment to exceed your expectations.

The Solution

Purafil
 
  • Biological Air Treater (BAT)
  • Deep Bed Scrubber for Odour Control (DBS)
  • Manhole Scrubber (MOLE)
  • Parallel Bed Scrubber (PBS)
  • PB400
  • Tub Scrubber for Odour Control (TS)
  • Vent Scrubber (VENT)
  • Vessel Scrubber (VS)
  • WWT Drum Scrubber (DS)
 
Chart odor control
Bat
 

Biological Air Treater (BAT)

Purafil
The Biological Air Treater (BAT) provides superior hydrogen sulfide gas (H2S) and Volatile Organic Compound (VOC) removal for municipal and industrial applications. Under high concentrations, the BAT is the most economical and convenient solution. Our patented media blend for the BAT allows for our standard equipment to achieve up to 99% removal when paired with a dry scrubber.
 

Deep Bed Scrubber for Odour Control (DBS)

Purafil
The Purafil Deep Bed Scrubber (DBS) is a highly effective, bulk media scrubber designed for controlled environments with medium-to-high contaminant gas levels. The DBS remedies the gases’ corrosive effects and meets stringent air quality standards set by the International Society of Automation (ISA). It is ideal for refineries, steel mills, smelters, chemical plants, petrochemical plants, and other hostile environments. It also functions, if needed, as a shelter-in-place application to protect employees.
 
 
DBSL
mole2
 

Manhole Scrubber (MOLE)

The MOLE Manhole Scrubber is a passive odour control system for street-level sewer manholes. It is designed to eliminate noxious sewer odours on busy streets filled with pedestrians. Odours enter the MOLE through the bottom of the unit and flow upwards through two vertically stacked disposable sacks of Odormix media.
 

Parallel Bed Scrubber (PBS)


The Purafil Parallel Bed Scrubber is a large, bulk media scrubber that removes high concentrations of target gases with very high horizontal air flow in municipal and industrial markets. This equipment is indicated for different applications such as screening rooms, headworks, large pump stations, refineries, and petrochemical plants. It is also used to polish the biofilter discharge air.
 
 
PBS
PB400L
 

PB400


Purafil’s multistage, Biological Air Treater 400, combines synthetic media and chemical media in the equipment to provide 99.5% removal of hydrogen sulfide and 95% overall odor control. Skid-mounted for easy delivery and installation, the PB-400 is a basic package for low air flow and low contaminant levels. It is designed to run continually and requires regular feeding of nutrients through the tank port.
 

Tub Scrubber for Odour Control (TS)


The TS provides clean air in controlled environments housing sensitive electronics. With a three-foot media bed depth.
 
 
Tub Scrubber
PVS
 

Vent Scrubber (PVS / VENT)


The Purafil Vent Scrubber (PVS) is ideal for removal of odorous gases from municipal vent pipes, with a 99.5% gas removal efficiency. These passive vent scrubbers are perfect for small vent applications and come standard with Purafil’s Odormix™ SP media.

 

Vessel Scrubber (VS)


The Vessel Scrubber is used at large headworks, full treatment plants and large digesters. It is sized for airflows from 13,592 to 33,980 m3/hr ( 8,000 to 20,000 cfm ).

 
 
EGS
Drum Scrubber
 

WWT Drum Scrubber (DS)


The WWT Drum Scrubber (DS) is engineered to remove odorous gases generated at pump stations, lift stations, wet wells and similar wastewater treatment areas where odour control is desirable. Recommended for low-level applications, the DS offers complete odour control by using a combination of medias. Quiet operation and no maintenance ensures maximum flexibility and performance.
 
filterbanner

Need some engineering advice?

Get in touch with windsor
About windsor group

Windsor provides total engineering solutions from concept through to after sales support. With 45 years industry experience, dealing with Windsor you’ll always get a solution oriented approach to handling your project that’s guaranteed to perform.

More about windsor group
 
 
 
 
Contact us
Wellington - Head Office:
+64 4 232 8080 windsor.sales@windsor.co.nz
 
Auckland - IPSCO Division:
+64 9 262 4474 ipsco.sales@windsor.co.nz
Christchurch - CFS Division:
+64 3 366 1411 sales@cfsfilter.co.nz
 
Windsor Engineering Australia:
+61 3 9793 2588 aust.sales@windsorgroup.com.au